Greg Hanks Design

Better living thru Handcrafted Technology
Home
BA-660
About Us
Contact Us
Site Map
Articles
For Sale

… C U T   T O   T H E   C H A S E … ! !

Microphone use

  • Plug the mic into the unit
  • Set the input selector to -45
  • Monitor the input, (Push monitor select button "IN")
  • Set the input selector and trim so that the average signal is around the  yellow led.
  • Set the Threshold control for desired limiting.
  • Set the attack, release and ratio controls to 12:00
  • Monitor the output signal, (Put the monitor select button in the "Out"
    position)
  • Set the output gain makeup control for around the yellow LED.

Line level use

  • Plug the Line level signal into the input of the BA-660.
  • Set the monitor selector switch to the input (in) position
  • Set the input selector and trim controls so that the signal is lighting the the
  • Yellow on the peaks.
  • Set the input selector and trim so that the average signal is around the yellow
    led.
  • Set the Threshold control for desired limiting.
  • Set the attack, release and ratio controls to 12:00
  • Monitor the output signal, (Put the monitor select button in the "Out"
    position)
  • Set the output gain makeup control for around the yellow LED.