Greg Hanks Design

Do not use the unit near any source of water or in excessively moist environments

OBJECT AND LIQUID ENTRY - -

Care should be taken so that objects do not fall and liquids are not spilled into the

enclosure through openings

VENTILATION - -

When installing the unit in a rack or any other location, be sure there is adequate ventilation..

HEAT - -

The unit should be situated away from heat sources such as radiators, heat registers, stoves or other units that produce heat.

POWER CORD PROTECTION - -

AC power supply cords should be routed

so that they are not likely to be walked

on or pinched by items placed upon

or against them, paying particular

attention to cords at plugs,

convenience receptacles and the point

where they exit from the unit. Never

take hold of the plug or cord of your

hand is wet and always grasp the plug

body when connecting or disconnecting it.

GROUNDING OF THE PLUG - -

This unit is equipped with a 3-wire grounding type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding type power outlet.

This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your 2 pin receptacle. Do not

defeat the purpose of this grounding-type plug by removing the grounding pin.

The unit is heavy, and made with delicate components and as such should only be used with racks and stands recommended by the manufacturer. The unit and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the unit and cart combination to overturn.

WALL OR CEILING MOUNTING. - -

The unit should be mounted to a wall or ceiling only as recommended by the manual.

CLEANING - -

The unit should be cleaned only as recommended by the manufacturer.

NON USE PERIODS - -

The AC power supply cord should be removed from the unit when left unused for a long period of time.

POWER SOURCES - -

Care must be taken to ensure that the unit is only connected for voltage that is selected via the internal selector(s).

DAMAGE REQUIRING SERVICE - -

The unit should be serviced by qualified service personnel when;

A) The AC Power supply cord or the

plug has been damaged; or

B) Objects have fallen into the unit; or

C) The unit has been exposed to rain

or liquids have been spilled into

the unit or

D) The unit has been exposed to

thermonuclear explosion; or

E) The unit does not appear to

operate normally or exhibits A

marked change in performance; or

F) The unit has been dropped or

the enclosure exhibits

significant damage.